| Picture |
Model |
Description |
Specifications |
Price |
|
PA-212 |
The B-52 PA-212 is a
versatile cabinet ideal for nightclubs, karaoke bars, live sound and
venues where limited space is a key factor. The PA-212 offers high-power
handling and efficiency from an extremely compact enclosure. An
exceptional three-way system can be achieved by combining any
Architectural Series subwoofer.
All
B-52 Medium and Large / Concert Systems are rear ported using Aeroports.
Rear porting results in a smoother sound wave since the inherent
problems associated with the interaction of loudspeakers and ports are
virtually eliminated. This design smoothes the air flowing in and out of
the cabinet, reducing port turbulence and exit noise inherent to
conventional porting. The Aeroport increases linearity, lowers
distortion, reduces 5th-order harmonic distortion and provides an output
increase as high as 2-3 dB. |
Nominal
Impedance:8 Ohms
Frequency Response:50-19K Hz
High-Freq. Dispersion:60 x 40
X-Over Points:1.6K Hz
Power Handling:650 watts
SPL @ 1w1m:97 dB
Peak SPL:128 dB
Dimensions (W”x H” x D”):16 x 24 x 16
Weight (lbs):53
|
$579.99 MAP
 |
 |
PA-215
|
The B-52 PA-215 has
excellent high-output and full bandwidth coverage from an extremely
compact full-range cabinet. Components include a B-52 15-200 loudspeaker
with a cast-aluminum frame, a precision-wound 4” polyamide voice coil
and a 1” exit titanium diaphragm compression driver. The PA-215 is
designed for those seeking a maximum output system that is modest in
both size and weight. All B-52 Medium and Large / Concert Systems are
rear ported using Aeroports. Rear porting results in a smoother sound
wave since the inherent problems associated with the interaction of
loudspeakers and ports are virtually eliminated. This design smoothes
the air flowing in and out of the cabinet, reducing port turbulence and
exit noise inherent to conventional porting. The Aeroport increases
linearity, lowers distortion, reduces 5th-order harmonic distortion and
provides an output increase as high as 2-3 dB. The Selenium
COMP-3300 compression driver features a 2" exit pure titanium diaphragm
designed with Impregnated Polymer Fiber surround for high
sensitivity, low distortion and a smooth extended frequency response. An
optimized aluminum injected phase plug avoids phase cancellation
problems. High flux density magnetic assembly with copper shorting ring
lowers distortion and reduces the voice coil self-inductance. The
compression driver's base and cover are injected aluminum assuring high
mechanical resistance. |
Nominal
Impedance:8 Ohms
Frequency Response:40-19K Hz
High-Freq. Dispersion:60 x 90
X-Over Points:1.6K Hz
Power Handling:650 watts
SPL @ 1w1m:98 dB
Peak SPL:129 dB
Dimensions (W”x H” x D”):19 x 26 x 16
Weight (lbs):73
|
$629.99 MAP
 |
 |
PA-315 |
The B-52 PA-315
produces a remarkable full-range response with deep bass, smooth mids
and pristine highs. It is ideal for venues where wide coverage and
extremely high-output is required. The PA-315 utilizes a B-52 15-120
loudspeaker, an 8” midrange speaker housed in a dampened and sealed
sub-enclosure and a 1” exit titanium diaphragm compression driver,
mounted on a wave-guide. All B-52 Medium and Large / Concert Systems are
rear ported using Aeroports. Rear porting results in a smoother sound
wave since the inherent problems associated with the interaction of
loudspeakers and ports are virtually eliminated. This design smoothes
the air flowing in and out of the cabinet, reducing port turbulence and
exit noise inherent to conventional porting. The Aeroport increases
linearity, lowers distortion, reduces 5th-order harmonic distortion and
provides an output increase as high as 2-3 dB |
Nominal
Impedance:8 Ohms
Frequency Response:40-19K Hz
High-Freq. Dispersion:100
X-Over Points:500 & 2.5K Hz
Power Handling:400 watts
SPL @ 1w1m:100 dB
Peak SPL:130 dB
Dimensions (W”x H” x D”):19 x 27 x 16
Weight (lbs):84
|
$649.99 MAP
|
|
PA-15X |
he B-52 PA-15X
provides high acoustic output with smooth mids and accurate highs that
are not fatiguing to the ear. The PA-15X is ideally mated with a B-52
Architectural subwoofer for a high-power, full-fidelity system. The
COMP-3300 2” exit compression driver is coupled to a large format horn
for wide dispersion, while the B-52 15-200 4" voice coiled loudspeaker
delivers rock-solid low frequency performance.
- Made in the
U.S.A.
- 4”
high-temperature polyamide voice coils
- Cast-aluminum
frames & vented magnet assemblies
- COMP-330 2”
exit titanium compression drivers
- Selectable
full-range/bi-amp mode switch
- 13-ply
void-free Baltic birch construction
- Black or
white scratch resistant acrylic textured paint
- Internal
flying hardware (3/8" - 16 TPI)
- Internal
acoustic dampening
- Enhanced-grip
B-52 handles
- Dual
Neutriktm NL4 Speakon connectors
All
B-52 Full Range and Lagre Full Range Systems are rear ported using
Aeroports. Rear porting results in a smoother sound wave since the
inherent problems associated with the interaction of loudspeakers and
ports are virtually eliminated. This design smoothes the air flowing in
and out of the cabinet, reducing port turbulence and exit noise inherent
to conventional porting. The Aeroport increases linearity, lowers
distortion, reduces 5th-order harmonic distortion and provides an output
increase as high as 2-3 dB.
The Selenium
COMP-3300 compression driver features a 2" exit pure titanium diaphragm
designed with Impregnated Polymer Fiber surround for high
sensitivity, low distortion and a smooth extended frequency response. An
optimized aluminum injected phase plug avoids phase cancellation
problems. High flux density magnetic assembly with copper shorting ring
lowers distortion and reduces the voice coil self-inductance. The
compression driver's base and cover are injected aluminum assuring high
mechanical resistance. |
Nominal
Impedance:8 Ohms
Frequency Response:40-19K Hz
High-Freq. Dispersion:60 x 40
X-Over Points:1.4K Hz
Power Handling:650 watts
SPL @ 1w1m:98 dB
Peak SPL:129 dB
Dimensions (W”x H” x D”):21 x 31 x 21
Weight (lbs):94
|
$949.00 MAP
|
 |
PA 1515X |
The B-52 PA-1515X has
a remarkable full-range response by combining rock-solid low end, smooth
mids and detailed, yet pristine highs. Ideal for live sound and playback
environments, the PA-1515X delivers the performance usually available
only with a subwoofer-equipped system.
- Made in the
U.S.A.
- 4”
high-temperature polyamide voice coils
- Cast-aluminum
frames & vented magnet assemblies
- COMP-330 2”
exit titanium compression drivers
- Selectable
full-range/bi-amp mode switch
- 13-ply
void-free Baltic birch construction
- Black or
white scratch resistant acrylic textured paint
- Internal
flying hardware (3/8" - 16 TPI)
- Internal
acoustic dampening
- Enhanced-grip
B-52 handles
- Dual
Neutriktm NL4 Speakon connectors
All
B-52 Full Range and Lagre Full Range Systems are rear ported using
Aeroports. Rear porting results in a smoother sound wave since the
inherent problems associated with the interaction of loudspeakers and
ports are virtually eliminated. This design smoothes the air flowing in
and out of the cabinet, reducing port turbulence and exit noise inherent
to conventional porting. The Aeroport increases linearity, lowers
distortion, reduces 5th-order harmonic distortion and provides an output
increase as high as 2-3 dB.
The Selenium
COMP-3300 compression driver features a 2" exit pure titanium diaphragm
designed with Impregnated Polymer Fiber surround for high
sensitivity, low distortion and a smooth extended frequency response. An
optimized aluminum injected phase plug avoids phase cancellation
problems. High flux density magnetic assembly with copper shorting ring
lowers distortion and reduces the voice coil self-inductance. The
compression driver's base and cover are injected aluminum assuring high
mechanical resistance.
All Architectural
Series folded horn subwoofer cabinets feature 13-ply Baltic birch
construction, scratch resistant black or white paint finish and a
LIFETIME construction warranty. |
Nominal
Impedance: 4 Ohms
Frequency Response:
35-19K Hz
High-Freq. Dispersion:
60 x 40
X-Over Points:
1.4K Hz
Power Handling:
1300 watts
SPL @ 1w1m:
101 dB
Peak SPL:
131 dB
Dimensions (W”x H” x D”):
21 x 46 x 21
Weight (lbs):
143
|
$1288.99 MAP
|
 |
PA-18S |
B-52’s direct
radiating subwoofers are built for the largest of venues, where touring
sound performance, immense power handling and thunderous bass is
essential. The B-52 18-200SL subwoofer is designed to withstand a
tremendous amount of abuse such as amplifier clipping and overpowering,
without failure. These subwoofers are mechanically engineered as true
“subwoofers” in that they will naturally roll-off at 160 Hz even with a
full-range signal. An electronic crossover is recommended.
The B-52
PA-18S is a low frequency sound reinforcement subwoofer that can be
used for a wide variety of permanent installations. The PA-18S produces
deep, thundering bass with a usable frequency response down to 30 Hz. At
the heart of this cabinet is the B-52 18-200SL with a cast-aluminum
frame and a precision-wound 4” voice coil.
|
|
Nominal
Impedance:
Frequency Response:
Power Handling:
SPL @ 1w1m:
Peak SPL:
Dimensions (W”x H” x D”):
Weight (lbs)::
|
8 Ohms
30-160 Hz
1000 watts
97 dB
128 dB
24 x 26 x 24
100 |
|
$599.99 MAP
|
 |
PA-1818S |
B-52’s direct
radiating subwoofers are built for the largest of venues, where touring
sound performance, immense power handling and thunderous bass is
essential. The B-52 18-200SL subwoofer is designed to withstand a
tremendous amount of abuse such as amplifier clipping and overpowering,
without failure. These subwoofers are mechanically engineered as true
“subwoofers” in that they will naturally roll-off at 160 Hz even with a
full-range signal. An electronic crossover is recommended.
* Black or white
scratch
* resistant, acrylic textured paint
* 4” high-temperature polyamide voice coils
* Cast-aluminum frames & vented assemblies
* Enhanced-grip B-52 handles
* Pole mount receptacle (PA-18S)
* 13-ply, void-free Baltic birch construction
* Dual Neutrik NL4 Speakon connectors
The B-52
PA-1818S is our largest passive direct-radiating subwoofer. It
includes two B-52 18-200SL subwoofers with cast aluminum frames and high
temperature 4” voice coils. Each subwoofer is housed in a separate
compartment, reducing port noise and preventing loudspeaker interaction.
With 2000 watts power handling, the PA-1818S complements any B-52
full-range system that needs to be both heard and felt.
|
|
Nominal
Impedance:
Frequency Response:
Power Handling:
SPL @ 1w1m:
Peak SPL:
Dimensions (W”x H” x D”):
Weight (lbs)::
|
4 Ohms
30-160 Hz
2000 watts
100 dB
131 dB
24 x 48 x 26
177 |
|
$1099.99 MAP
|
 |
PA-MN12 |
he B-52 PA-MN 12 is a
compact and powerful stage monitor that clearly projects sound that is
not fatiguing to your ears. Components include a B-52 12-200 loudspeaker
and a 1” exit titanium compression driver. All Architectural Series
folded horn subwoofer cabinets feature 13-ply Baltic birch construction,
scratch resistant black or white paint finish and a LIFETIME
construction warranty. |
|
Nominal
Impedance:
Frequency Response:
High-Freq. Dispersion:
X-Over Points:
Power Handling:
SPL @ 1w1m:
Peak SPL:
Dimensions :
Weight (lbs):
|
8 Ohms
50-19K Hz
60 x 40
1.6K Hz
650 watts
97 dB
128 dB
25 x 15 x 17
48 |
|
$579.99 MAP
|
 |
PA-MN15X |
he B-52 PA-MN 15X is
ideal for large stage applications. The COMP-330 2” exit compression
driver is coupled to a large format horn and delivers smooth mids and
accurate highs. The B-52 15-200 4” voice coiled loudspeaker delivers
clear mids and solid low end . The PA-MN 15X includes a selectable
passive / bi-amp operation switch.
All Architectural
Series folded horn subwoofer cabinets feature 13-ply Baltic birch
construction, scratch resistant black or white paint finish and a
LIFETIME construction warranty. |
|
Nominal
Impedance:
Frequency Response:
High-Freq. Dispersion:
X-Over Points:
Power Handling:
SPL @ 1w1m:
Peak SPL:
Dimensions :
Weight (lbs):
|
8 Ohms
40-19K Hz
90 x 40
1.4K Hz
650 watts
98 dB
129 dB
29 x 19 x 23
87 |
|
$979.99 MAP
|
 |
MATRIX 200 |
The
MATRIX-200 has fast become a popular member of the B-52 MATRIX
family of active systems. Compact, powerful and portable the MATRIX-200
delivers clean, accurate sound ideal for both stage and music playback
applications. The MATRIX-200 has a true 200-watt stereo amplifier, built
in 5-channel mixer, studio-quality digital effects, phantom power and
numerous patch inputs / outputs. |
|
$499.99 MAP
|
 |
MATRIX 600 |
he B-52
MATRIX-600 is the newest member of the popular MATRIX family of
active systems. Compact, powerful and portable the MATRIX-600 delivers
clean and accurate sound ideal for both live sound and music playback
applications. At the heart of the MATRIX-600 is a high quality 600-watt
RMS stereo amplifier designed to perfectly match the included satellite
speakers, built-in seven channel mixer, studio-quality DSP effects, 48V
phantom power and countless patch inputs / outputs. The MATRIX-600
satellite speakers boast a high-fidelity 10” 3-way design which
reproduces sound with amazing detail and clarity, traditionally
unattainable with a 2-way speaker. The satellite speakers include both
pole mounting cups and suspension points ideal for permanent
installations. Covers for the speakers, carrying bag for the
mixer/amplifier and cables are included. |
|
$999.99 MAP
|
 |
MATRIX 1000V2 |
The
MATRIX-1000 V2
is a complete sound reinforcement SOLUTION comprised of two 10” two-way
powered satellites and a dedicated powered 15” subwoofer. The
MATRIX-1000 V2 has a built-in three-channel 700-watt power
amplifier, three distinct volume controls, electronic crossover with
equalization and VCA compressor.
The circuitry is designed and fine-tuned to integrate all components for
the best possible sound. There is no need to tweak or finesse settings
on a crossover or compressor to make your system sound great. Simply
roll the system into place on its heavy duty casters, plug in the AC,
connect the two speaker cables, run two XLR cables to your mixer and
you’re ready to go! |
|
$849.99 MAP
|
 |
MATRIX 2000 |
The
MATRIX-2000 is a complete sound reinforcement
solution consisting of two 12” two-way speakers and an 18” subwoofer,
equipped with a built-in 1200-watt three-channel amplifier. The
three-channel amplifier houses all the electronics required to run the
system including electronic crossovers, equalization and compressors.
The electronic circuity is fine tuned to match all of the components for
the best possible sound.
The MATRIX-2000 is designed for easy operation, as you
do not need to tweak frequencies or finesse levels. To set-up the
system’s components, simply connect the XLR right and left signal
cables, speaker cables and power cord and you’re ready to go! |
|
$1499.99 MAP
|
|
(no picture available see link) |
M6C-SAT/PR. |
The
MATRIX-600 satellite speakers boast a high-fidelity 10” 3-way
design which reproduces sound with amazing detail and clarity,
traditionally unattainable with a 2-way speaker. The satellite speakers
include both pole mounting cups and suspension points ideal for
permanent installations. 3-way rear-ported speakers substantially
outperform traditional 2-way designs in virtually every application, 10"
high excursion woofer for extended and tight bass, 6.5” midrange with
oversized magnet for clarity and wide coverage area, 1” exit phenolic
tweeter on an exponential horn matches the acoustic response of 6.5"
midrange driver, Premium quality X-overs with air core inductors and
Mylar capacitors for clean and unrestricted SPL peaks, Light bulb
protection circuitry on the tweeters for worry-free operation, Built in
suspension points for permanent installation, 16-guage steel grilles,
rubber feet and a conveniently located top handle |
MATRIX 600 SATELLITE SPEAKER PAIR |
$699.99 MAP
|
 |
M1KV2-SAT/PR |
The
MATRIX-1000V2 satellites are loaded with a custom
designed 10” speaker and 1” titanium diaphragm compression driver. The
“horn” is a 90 by 60 elliptical waveguide that can be rotated 90 to
optimize the dispersion pattern to best suit your particular
application. These versatile speakers are pole-mountable and can sit as
stage monitors. They also include 3/8” – 16 tpi flying hardware for
small venue permanent installations. The rounded front of the satellite
speaker is a perfect fit for the convex face of the subwoofer, allowing
a mobile entertainer to stack, roll and transport the entire
MATRIX-1000V2 in and out of a venue in record time. |
MATRIX 1000 SATELLITE SPEAKER PAIR |
$329.99 MAP
|
 |
M2K-SAT/PR. |
The
MATRIX 2000 satellites re 12” two-way speakers are loaded with
B-52 custom designed 12” loudspeakers and 1“ titanium diaphragm
compression drivers, mounted to 900 x 400 constant directivity horns.
The speakers are designed to be pole mounted, sit as stage monitors and
have built-in (3/8” – 16 TPI) flying hardware for permanent
installations. The front panel of the two-way speakers are convex so as
to fit perfectly on to the subwoofer’s front grille. Each two-way
speaker has the power handling capability of 300 watts and a nominal
impedance of 4 ohms. |
MATRIX 2000 SATELLITE SPEAKER PAIR |
$529.99 MAP
|
